BenQ HT9060 Projector- Calibration 2

January 21, 2020 / By Art Feierman

BenQ HT9060 Projector Review - Calibration Settings: HDR

HDR

The HT9060 is capable of HDR. When fed an HDR signal the projector automatically switches to the HDR picture mode (called HDR10) and defaults to the BT2020 color space. There are very few adjustments in HDR10 and I left most of them at the factory default. There are other color space options in HDR (Auto, BT709, BT2020, and DCI-P3) but the default BT2020 setting performed the best. The white balance adjustments in HDR are extremely sensitive and caused more harm than good, so I left these at the default values as well.

Peak white in HDR measure at 155cdm2. The EOTF tracked well, rolling off at around 40% stimulus. The greyscale was slightly blue and unfixable due to the sensitivity of the white balance controls in HDR. The color gamut was fairly accurate measuring 97% of the P3 color gamut. 2020 coverage was almost 80% which puts in on par with a lot of flat panel displays.

[sam_pro id=1_35 codes=“true"]

Final ANSI lumen calculation

Calibrated mode (User 1)
Lens zoomed all the way in - 1380.57 lumens
Lens zoomed all the way out - 854.29 lumens
Lens zoomed ½ way - 1166.68 lumens

Calibrated Settings SDR:

Picture ModeUser 1
Color TemperatureNormal
Gamma2.4
Brightness51
Contrast36
Color50
Tint50
Sharpness8

[sam_pro id=1_67 codes="true"]

White Balance:

Picture ModeCustomize
Red High103
Green High100
Blue High96
Red Low253
Green Low256
Blue Low256

Color Management:

ColorHueSaturationGain
Red232194145
Green120168162
Blue149200164
Cyan261136190
Magenta118167177
Yellow134167189
Established in 2003 and providing the most in-depth reviews since.

Projector Reviews

HomeAbout UsContact Us

© 2022 Projector Reviews

crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram