The LS100 isn’t a large projector, more medium sized. It is, however wide, with a pretty low profile,
I always like to start in the front, but the question is, which end is the front of this projector. The part facing the screen, or the part you see, from further back in the room? We’ll call the part facing you to the screen the front. After all, it is designed to look good, and be seen. Ever see a good looking back of a TV?
The optics are on the top, toward the front of the projector. Also found up there is the grill hiding the 16 watt speaker. The speaker seems to be primarily aimed toward you and up.
Everything else but the four indicator lights (top) – Power/Standby, Status, Laser, and Temp – and the IR sensor found on the front top edge, for the remote control, is found on the sides. Remember, this being a laser projector, there’s no door for the lamp (which is usually on the top). Air intakes and exhaust are on the sides.
[sam_pro id=1_35 codes="true"]
There’s a single screw thread adjustable drop down foot centered below the front.
Looking from behind the projector the connectors are located on the sides. The Control Panel is on one side, near the front, while all the inputs and connectors are on the the other.
There are two more screw thread adjustable feet on the bottom by the back, for a solid 3 point stance.