Note: The projector had over 257 Hours on the lamp before I calibrated it and took the light measurements. A brand-new lamp will most likely have slightly higher measured lumens.
The RS440U has 9 picture mode presets (User 1-5, Cinema, Natural, Animation and HDR) I spent most of my time with User 1-2 & HDR modes.
Cinema, User and Natural modes all measured very similar. For my Best (dark room) calibration I choose User 1 mode and set the lamp to low. I kept the default Color Profile at Standard, Color Temp at 6500 and the default Gamma at Normal. I lowered Contrast to -2 to help with gamma and raised brightness to 1. Color and Tint I kept at 0. White balance pre-measurements came in about 7000K average at a 2.19 average gamma with DeltaE ranging from 5 at 50IRE and down to 2-3 on the low and high ends. The whites clipped at 232 and lowering contrast had no effect. Color (CMS) also measured very good (See advanced calibration page). No too bad but definitely room for improvement.
[sam_pro id=1_65 codes="true"]