ViewSonic LS620X Short Throw Laser Projector Review – Hardware 1

November 20, 2018 / By Chris Kahl

ViewSonic LS620X Short Throw Laser Projector Review – Hardware 1: Overview, Inputs and Connectors, The Lens


ViewSonic’s LS620X short throw laser projector is designed to be used for business and education markets, i.e. the conference room and the K-12 classroom.  The projector measures in at 5.8 inches tall, 16.4 inches wide and 11.7 inches deep, and weighs 12.1 lbs.  As what we would term a portable-install projector, it’s much more likely to see this model ceiling mounted than it is to see someone carrying it around.

This projector, like most in this category, supports table-top and ceiling mounting options, with front and rear projection.  I used the table-top front projection method for this review, so all descriptions appearing here will be as if standing in front of the projector while it is sitting on a table.

The front of the projector, of course, sports the lens, which is off-center.  We also find a small IR receiver for the remote control in the upper right corner.  On the bottom of the front, we find two adjustable feet in the corners.  The grille on the left end seems to be for design purposes only.  The right side is mostly open to allow for the cool, room air intake and houses the air filter.  The right side of the projector is also mostly open, and functions as the hot air exhaust, with two quite fans keeping the projector cool.

The rear of the projector is where we find all the inputs and connectors, which we’ll discuss in the next section.  Suffice it to say, there are a healthy amount of connectors, perfect for the intended applications in business and education.  The back of the projector is also where we find a security locking bar, and a security lock slot.  The top of the projector is where we find the focus ring for the lens, as well as the three indicator lights and a simple control panel.  The twin 10 Watt speakers are found on the bottom of the projector, along with the threaded holes to allow attachment to a ceiling mount.

[sam_pro id=1_119 codes="true"]

Inputs and Connectors

ViewSonic LS620X Inputs
The Inputs and Connectors are found on the rear of the ViewSonic LS620X.

The ViewSonic LS620X has a pretty good compliment of inputs and connectors to be adequate for just about any office or educational use.  As you can see in the above image, the input panel is located on the rear of the projector and is grouped in different color-coded sections.  Starting on the left, and not really a connector, is the rear IR receiver for the remote control.  It’s listed, but is just a grey dot covering the actual sensor.

Next we have a standard RJ-45 LAN connection.  In the brown box to the right, we find HDMI1 and HDMI2/MHL.  The next, un-colored section offers a USB type A port with 5V/1.5A power, followed by a Mini USB port.  In the next section, colored blue, we find two VGA inputs labeled Computer 1 and Computer 2, stacked one on top of the other.

The next un-colored section is a VGA (Computer) Out for connection to an external monitor, and the obligatory RS-232 for command and control.  The next section is colored green and consists of an S-Video input, as well as all three composite video and audio inputs (Yellow, Red and White) – not something I’ve seen a lot lately, perhaps because this projector is intended to replace older models where it is more likely to find Red and White audio connections.

The next column is split with a light blue background, effectively grouping it with the Computer group, is an Audio-In 3.5mm MiniJack; below that we find the 3.5mm Audio-Out MiniJack.  The last connection we have here is the 12V Trigger, for controlling motorized projection screens.

The power connection is found below the source inputs, along with a security locking bar and a security lock slot.

The Lens

The ViewSonic LS620X is a short throw projector.  This projector has a fixed focal length, which means that if you want to change the image size at all, you will need to physically move the projector toward the screen for a smaller image, or away from the screen for a larger image.  This lens has a throw ratio of just 0.61:1, which means an image between 60 inches diagonally and 150 inches diagonally is projected from a distance of just 2.4 feet to 6.1 feet from the front of the lens to the screen.

The lens is somewhat recessed, which means it’s protected from damage better than the Acer S1386WHN that I reviewed recently.  It’s not so much an issue when ceiling mounted (other than dust), but can certainly make a difference when sitting on a table top.  There is an attached lens cap, but seeing how this unit like likely be ceiling mounted I imagine there isn't much practical use for it.

Next, we’ll take a look at the control panel, remote control, and a detailed look at the menus this ViewSonic has to offer.

[sam_pro id=1_118 codes="true"]

Established in 2003 and providing the most in-depth reviews since.

Projector Reviews

HomeAbout UsContact Us

© 2022 Projector Reviews

crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram