The PX727-4K is is well equipped with inputs and other connectors for a lower cost projector. It is true, though, like most home projectors today, that there are no more “legacy” composite video or S-Video connectors. What there is, from left to right:
A pair of stereo audio jacks – one in, one out. A PC VGA input (standard DB15 connector) comes next. It can handle an analog computer, or component video.
A pair of HDMIs is next. They are different! The left one is HDMI 1, and is HDMI 2.0 with HDCP 2.2 – which meets the requirements of Blu-ray UHD and other copy-protected content.
The second one is the good old HDMI 1.4, which has been around for a number of years. In theory, the first one should handle anything HDMI, but most manufacturers include an HDMI 1.4 – just in case there’s a problem, perhaps with a 10-year-old player.
As always, I must complain: a third HDMI input would be very helpful for those not doing switching through an AV receiver. I tell all the manufacturers, but few have done so. Most recently, a Vivitek had three. Other than high-end commercial projectors, two is all you will normally find.
Next comes a USB Type B, for servicing, followed by an old-school, RS-232 serial port, for command and control of the projector. Then comes the USB Type A port which is there to provide a 5V 1.5amp output (it can be used for recharging most 3D glasses). Finally, there's a 12-volt screen trigger. That's something not often found on lower cost home projectors, but, if you need it, great. It's used for raising and lowering a motorized screen which has a 12-volt trigger. More and more these days, however, companies are moving to wireless control rather than 12-volt triggers.
[sam_pro id=1_47 codes="true"]